Linda Gardner is a hopeless craft addict which lead to her Craftaholics Anonymous® blog to document her obsession. We asked Linda to channel her obsession onto The Home Depot Blog and document her reflooring project using vinyl tiles.
The result was simply amazing. Linda tiled her boys’ bathroom and made it look effortless and easy to follow. Read on to see how the transformation took place.
Bathroom Transformation with Vinyl Flooring
Above you can see the state of the bathroom before we replaced the floor.
We added grout between the tiles to get a really stellar tile-like look. It looks just like tile! It’s gorgeous! This is the comparable after shot with the Luxury Vinyl Tile with dark gray grout.
The on-trend vinyl tile that I used was the perfect neutral color with both gray and brown undertones. I decorate with grays in this bathroom, so I chose a gray grout to draw out the gray tones more.
Vinyl tile is a snap to install! Here is how we did it.
Materials
- Vinyl Tile
- Hammer
- Pry Bar
- Utility Knife
- Grout
- Spacers (we used ⅛-in. spacers)
- Level
- Angle Tool
- Pencil
- Grout Trowel
- Damp Rags
Step 1: Remove existing flooring
First, we removed the existing quarter round with a hammer and pry bar.
Step 2: Plan the layout of your vinyl tiles
Next we used a pencil, the angle tool, and a level to draw out the layout of the tiles.
We laid the tiles at a 45-degree angle.
Step 3: Place the tiles
We peeled off the paper backing to expose the adhesive back. Then we laid the full tiles in place.
Place the spacers between the tiles to get the spacing right.
If a tile was slightly off, we were able to pull the tile up and adjust it slightly.
Step 4: Cut the tiles to fit
Vinyl tiles are easy to cut.
Simply score the tile with a utility knife and a straight edge. My hubby is using his level as a straight edge in this image above.
Then bend the tile and it will snap along the scored seam. It was incredibly easy to do! No tile cutters, no shattering a tile trying to cut it.
The luxury tile was very user friendly.
Step 5: Fill grout lines
After we finished laying the vinyl tiles, we mixed up the ready-mix grout and filled in the grout lines with a trowel.
We wiped up the excess grout with damp rags and allowed the grout to dry according to package instructions.
Then we replaced the quarter round and put the rug back in place, and we were done!
The resilient vinyl tile was so easy to install, and it looks fantastic!
The only thing that I didn’t like about the vinyl tile we chose, was that there were only two tile patterns to pick from. So we had to be creative in laying them out so that the same tile wasn’t completely duplicated right next to it with the design going the same direction. But we are pleased with the result.
The post Bathroom Transformation with Vinyl Tile appeared first on The Home Depot Blog.
from Roofing Pro http://ift.tt/1UzMlwp
Curated by a professional Roofing Contractor
No comments:
Post a Comment